IP-30

Technical Data Sheet

PRODUCT NAME: IP 30

Nº CAS: 64742-47-8

NUMBER UN: 1268

DESCRIPTION: Aliphatic solvent. Distillates (Petroleum).

Specifications

PHYSICOCHEMICAL PARAMETER MIN MAXMETHOD
COLOR SAYBOLT28N/AASTM D-6045
SPECIFIC GRAVITY (25 °C)0,780,81ASTM D-1298
DISTILLATION150N/AASTM-D-86
Initial Boiling Point °C (IBP)N/A210ASTM-D-86
Final Point °C (FP)   
FLASH-POINT (°C)>30N/AASTM D-93
WATER (ppm) N/A 100 ASTM D-6749
VISCOSITY (cst @ 40 °C)0,8N/AASTM D-445
SULFUR CONTENT (ppm)N/A20 ASTM D-5453
AROMATICS (% Vol)N/A1ASTM D-6591

Applications

Generic Industrial Solvent, Surface Cleaners, Aerosol Vehicle, adhesives, Industrial Cleaner &Degreaser, Reaction Media.

Elaboration Date:Last Review Date:Designed By:Approved By:
ene-15jun-18Lab Quality AnalystTechnical Director

1. Product identification

Product name: IP-30

Synonyms: petroleum distillates, mineral spirit, mineral solvent, aliphatic solvent.

Company: Benzoatos de Venezuela Benzoven, C.A.

Adress: Calle Interna Parque Industrial del Calzado parcela # 75 Zona Ind. Santa Cruz Aragua. Zona Postal 2123

City: Santa Cruz de Aragua, Edo. Aragua. Venezuela

Phones: +58 243-2140597/ +58 243-2610861 (Venezuela)

Emergency number: +58 243 2140591

2. Hazard Identification

Classification

NFPA Classification:GHS Classification:
Health: Category 1Aspiration hazard: Category 1
Inflammability: Category 3Chronic aquatic toxicity: Category 2
Reactivity: Category 0Flammable liquid: Category 3
 Skin irritant: Category 2

 

Principal hazards

Eyes: May cause moderate irritation

Ingestion: May cause lung damage if ingested.

Inhalation: Vapors may be slightly irritating. They can cause dizziness and vomiting.

Skin: May cause moderate skin irritation. Repeated exposure can cause dry skin.

Sign: Caution

3. Ingredients information

Chemical nameCAS-No.Concentration  [%]
Distillates of hydrotrate petroleum64742-47-8100%

4. First aid measures

InhalationImmediately move the victim to fresh air. Seek medical attention.
IngestionDo not induce vomiting. Seek medical attention immediately.
Skin contactRemove contaminated shoes and clothing. Clean the affected area with plenty of water.
EyesIf the eyes become irritated, move the victim to fresh air. Wash eyes with plenty of water. If symptoms persist, seek medical attention.

5. Fire protection measures

Clasification of flammability of NFPAClass-II liquid fuel according to NFPA
Flash pointClosed cup: 30°C (86°F)
Lower flammability limitAP 0.5% Upper Flammability Limit AP 6%
Temperature of auto ignition210 °C (410 °F)
Products of risky combustionCarbon dioxide, carbon monoxide, vapors, fumes, and / or unburned hydrocarbons
Special properties

Liquid Fuel!

This product generates vapors when heated above ambient temperatures. Vapors can cause a sudden fire. Vapors can travel to the ignition source and generate a flame. Use only with adequate ventilation.

6. Measures against spills or accidental leaks

Fuel Liquid! The spill can cause a fire hazard, but this material will not ignite easily.

  • Evacuate all non-essential personnel from the immediate area.
  • Eliminate all sources of ignition. Stop the leak, if you can do it without risk.
  • Do not touch or walk through spilled material.
  • Avoid entering channels, sewers, basements, or closed areas.
  • Absorb or cover with dry earth, sand, or other non-flammable material and transfer to waste containers.
  • For large spills, secure the area and control access. In an urban area, clean up the spill as soon as possible; in natural environments, follow the cleaning recommendations of an environmental specialist.
  • Collect the liquid to be recycled and / or discarded.
  • Collect any excess material with absorbent pads, sand, or other inert, absorbent and non-flammable materials.
  • Place in appropriate waste containers, for later disposal.
  • Comply with all laws and regulations.

7. Handling and storage

Driving

  • Keep containers closed, and do not handle or store them near heat, sparks, or any other potential source of ignition.
  • DO NOT come in contact with oxidizing materials.
  • Use only with adequate ventilation and personal protection.
  • Avoid contact with eyes, skin and clothing.
  • Prevent contact with food and tobacco products.
  • Use gloves made of waterproof materials and protective clothing, if direct contact is anticipated.
  • Use the appropriate respiratory protection.
  • DO NOT pressurize, cut, weld, puncture or grind containers.
    Empty containers may contain product residues that can ignite.

Storage

  • Store in a cool, dry, well ventilated place.
  • Store only in approved containers.
  • Do not store with oxidizing agents.
  • Do not store at elevated temperatures or in direct sunlight.
  • Protect containers against physical damage.
  • The storage area must maintain OSHA requirements and applicable codes to prevent fires.
  • Consult with federal, state and local authorities before reusing, reconditioning, recovering, recycling or disposing of empty containers or waste residues of this product.

8. Exposure controls and personal protection

Engineering controls

  • Provide ventilation or other engineering controls to maintain vapor or mist concentrations within the applicable workplace exposure limits listed below.
  • A station for emergency eye lava and safety shower should be placed near the work site.

Personal protective equipment

Personal protective equipment must be selected based on the conditions under which this product will be used.

The minimum requirements for personal protective equipment:

  • Protective gloves
  • Suitable clothing
  • Protective lenses

Eyes protection

  • Safety glasses equipped with side shields are recommended as minimum protection in industrial locations.
  • An emergency eye wash station and safety shower should be placed near the work site.

Hands protection

  • Avoid skin contact.
  • Use gloves for industrial use.
  • Wash hands and other exposed parts of the skin with mild soap and water before eating, drinking, smoking, using the bathroom, or when leaving work.

Body protection

  • Avoid contact with skin.
  • Wear non-flammable long-sleeved clothing while working with flammable and combustible liquids.

Respiratory protection

  • Use a multipurpose (US) or cartridge type respirator (EN 14387).
  • Respirators must be used in accordance with OSHA requirements (29CFR 1910.134)

9. Physical and chemical properties

Appearance: Transparent
Physical state: Liquid
Odor: Low odor (hydrocarbon)
pH: without data
Steam preassure, mmHg at 25 °C: <1
Grav. esp. of steam, at 1 atm (Air=1): >1
Solubility in water: not soluble

Specific gravity at 25 °C: 0.78-0.81
Evaporation rate (nBuAc=1): <1
Evaporation index (n-BuAc=1): <1
Boiling point °C: >150 approx.
Flash point: >86 °F / >30 °C ASTM D-93 (Closed cup)
Flammability %: no data

10. Stability and reactivity

Chemical stability: Stable under ordinary conditions of use and storage.
Conditions to avoid: Keep away from any source of ignition and oxidizing agents.
Materials to avoid: Strong oxidizers.
Hazardous decomposition products: No additional hazardous products identified
Hazardous polymerization: Not expected to occur.

11. Toxicological information

No definitive information is available on carcinogenicity, mutagenicity, target organs or developmental toxicity.

12. Ecological information

Not rated

13. Disposal considerations

The conditions of use can cause this material to become a «hazardous waste», as defined by federal and state regulations.

It is the user’s responsibility to determine if the material is a hazardous waste subject to RCRA at the time of disposal.

The transport, storage and final disposal of the waste material must be carried out in accordance with the RCRA regulations (40 CFR 260 to 40 CFR 271).

14. Transport information

Risk classification: Flammable liquid

DOT: UN number 1268

Signboard: petroleum distillates, N.O.S

Classification: 3

IMDG: UN number: 1268 ; CLASS 3 group 3

EMS No.: F-E, S-E

Signboard: petroleum distillates, N.O.S

Marine pollutant: no

IATA: UN number: 1268 class; CLASS 3
Signboard: petroleum distillates, N.O. S

15. Regulatory information

This security sheet complies with the legal regulations of:

  • Mexico: NOM-018-STS-2000
  • Guatemala: Labor Code, decree 1441
  • Honduras: Executive Agreement No. STSS-053-04
  • Costa Rica: Decree No. 28113-S
  • Panama: Resolution # 124, March 20, 2001
  • Colombia: NTC 445 July 22, 1998
  • Ecuador: NTE INEN 2 266: 200

16. Aditional information

Review: 1

Date: 06/2018

SDS Number: BNZ-IP30-01

Status: Final

 

Elaborated by: Quality Control Analyst

Approved by: Technical Director

Scroll al inicio